
14×32 Utility Shed $8,795
Red Mahogany poly · Burnished Slate metal roof
Danville, AL-TopNotchBuilding-N. Robbins · DanvilleUtility Sheds · 14×32 · Elkmont, AL
There is 1 14x32 utility shed in stock near Elkmont, AL right now - within delivery range of Elkmont. This is a real building sitting on a dealer lot today, photographed where it stands, not a rendering of something that would have to be built.It is priced at $8,795 cash. Most dealers here also quote rent-to-own with no credit check, which puts a building this size in the yard for a payment rather than a lump sum.The straightforward workhorse: A-frame roof, wide doors, no loft - the lowest cost per square foot on most lots.At 14×32 - 448 square feet - this footprint is closer to a small outbuilding than a shed: vehicle or equipment storage, or a shop with room to work around what is parked in it.1 dealer carries this configuration near Elkmont, with a physical lot you can walk before you buy.
Every 14×32 utility sheds here is $8,795 cash, so choose by colour and how far you want to drive.

14×32 Utility Shed $8,795
Red Mahogany poly · Burnished Slate metal roof
Danville, AL-TopNotchBuilding-N. Robbins · DanvilleNo 14×32 utility sheds in that colour right now — clear the filter to see all 1.
Each has a physical lot you can walk before you buy.
Danville, AL-TopNotchBuilding-N. Robbins
99 Reeder Rd , Danville, AL, 35619, USA · 39 mi away
1 in stock
They are priced at $8,795 cash. Most dealers here also quote rent-to-own with no credit check, which puts a building this size in the yard for a payment rather than a lump sum.
The straightforward workhorse: A-frame roof, wide doors, no loft - the lowest cost per square foot on most lots.
At 14×32 — 448 square feet — this footprint is the one buyers pick when a smaller shed has already run out of room.
1 dealer carry this configuration near Elkmont, each with a physical lot you can walk before you buy.
About 14×32 utility sheds in Elkmont, AL.
The 14x32 utility shed currently in stock near Elkmont is priced at $8,795 cash. Rent-to-own is available from most dealers on this page, typically with no credit check.
At 448 square feet, a 14×32 building is over the 200 sq ft threshold most jurisdictions use for permit-exempt accessory structures, so plan on pulling a permit. Check with the Elkmont building department, or the county if you are outside city limits. Setback requirements from property lines apply regardless of size, as do HOA rules.
Yes. Every building on this page is delivered fully assembled on a mule or trailer and set on your prepared site - most dealers here include free delivery within about 50 miles of their lot. You need a reasonably level pad and a clear path wide enough for the building to pass through. Gravel is the most common foundation; a concrete slab works but is rarely required at this size.
The straightforward workhorse: A-frame roof, wide doors, no loft - the lowest cost per square foot on most lots. The other styles stocked near Elkmont, AL are linked further down this page, so you can compare the same footprint across layouts before deciding.
Yes - this page is built from live dealer inventory, and sold buildings drop off it. As of your visit there is 1 14x32 utility shed available near Elkmont. Contact the dealer directly through the listing to hold one.
Every dealer on this page has a lot near Elkmont you can walk today.