Tool Sheds · 10×16 · Meridianville, AL
10×16 Tool Sheds for Sale in Meridianville, AL
There is 1 10x16 tool shed in stock near Meridianville, AL right now - within delivery range of Meridianville. This is a real building sitting on a dealer lot today, photographed where it stands, not a rendering of something that would have to be built.It is priced at $4,422 cash. Most dealers here also quote rent-to-own with no credit check, which puts a building this size in the yard for a payment rather than a lump sum.Compact storage for tools, mowers, and equipment where a full barn is more building than you need.At 10×16 - 160 square feet - this footprint is the common middle ground: a riding mower, a workbench, and shelving down one wall, with room to walk between them.1 dealer carries this configuration near Meridianville, with a physical lot you can walk before you buy.
1 in stock within 60 miles
160 sq ft 1 local dealer Free delivery
1 in stock near Meridianville
Every 10×16 tool sheds here is $4,422 cash, so choose by colour and how far you want to drive.
Within driving distance 1
No 10×16 tool sheds in that colour right now - clear the filter to see all 1.
Dealers carrying 10×16 tool sheds near Meridianville
Each has a physical lot you can walk before you buy.
Cotton State Barns of Cullman
2017 4th St SW, Cullman 35057, USA · 51 mi away
Free delivery $0 down Rent to own Warranty
1 in stock
About 10×16 tool sheds
They are priced at $4,422 cash. Most dealers here also quote rent-to-own with no credit check, which puts a building this size in the yard for a payment rather than a lump sum.
Compact storage for tools, mowers, and equipment where a full barn is more building than you need.
At 10×16 - 160 square feet - this footprint is the one buyers pick when a smaller shed has already run out of room.
1 dealer carry this configuration near Meridianville, each with a physical lot you can walk before you buy.
Keep browsing near Meridianville
10×16 in other styles
10×16 Tool Sheds in nearby cities
Common questions
About 10×16 tool sheds in Meridianville, AL.
How much do 10x16 tool sheds cost in Meridianville, AL?
The 10x16 tool shed currently in stock near Meridianville is priced at $4,422 cash. Rent-to-own is available from most dealers on this page, typically with no credit check.
Do I need a permit for a 10×16 tool shed in Meridianville, AL?
At 160 square feet, a 10×16 building falls under the 200 sq ft mark that most jurisdictions use to exempt detached accessory structures from a building permit - but setback rules from property lines apply at any size, and HOA rules apply on top of both. Confirm with the Meridianville building department, or the county if your address is outside city limits, before you schedule delivery. Your dealer can usually tell you which applies.
Can a tool shed be delivered to Meridianville?
Yes. Every building on this page is delivered fully assembled on a mule or trailer and set on your prepared site - most dealers here include free delivery within about 50 miles of their lot. You need a reasonably level pad and a clear path wide enough for the building to pass through. Gravel is the most common foundation; a concrete slab works but is rarely required at this size.
What is the difference between a tool shed and the other styles?
Compact storage for tools, mowers, and equipment where a full barn is more building than you need. The other styles stocked near Meridianville, AL are linked further down this page, so you can compare the same footprint across layouts before deciding.
Is this in stock right now?
Yes - this page is built from live dealer inventory, and sold buildings drop off it. As of your visit there is 1 10x16 tool shed available near Meridianville. Contact the dealer directly through the listing to hold one.
Ready to see 10×16 tool sheds in person?
Every dealer on this page has a lot near Meridianville you can walk today.