
10×16 Tool Shed $4,422
Tan painted · Hunter Green metal roof
Jacksonville, AL-Johnny Lamar Pruitt · JacksonvilleTool Sheds · 10×16 · Temple, GA
There is 1 10x16 tool shed in stock near Temple, GA right now - within delivery range of Temple. This is a real building sitting on a dealer lot today, photographed where it stands, not a rendering of something that would have to be built.It is priced at $4,422 cash. Most dealers here also quote rent-to-own with no credit check, which puts a building this size in the yard for a payment rather than a lump sum.Compact storage for tools, mowers, and equipment where a full barn is more building than you need.At 10×16 - 160 square feet - this footprint is the common middle ground: a riding mower, a workbench, and shelving down one wall, with room to walk between them.1 dealer carries this configuration near Temple, with a physical lot you can walk before you buy.
Every 10×16 tool sheds here is $4,422 cash, so choose by colour and how far you want to drive.

10×16 Tool Shed $4,422
Tan painted · Hunter Green metal roof
Jacksonville, AL-Johnny Lamar Pruitt · JacksonvilleNo 10×16 tool sheds in that colour right now - clear the filter to see all 1.
Each has a physical lot you can walk before you buy.
Jacksonville, AL-Johnny Lamar Pruitt
2430 Pelham Rd. S., Jacksonville, AL, 36265, USA · 43 mi away
1 in stock
They are priced at $4,422 cash. Most dealers here also quote rent-to-own with no credit check, which puts a building this size in the yard for a payment rather than a lump sum.
Compact storage for tools, mowers, and equipment where a full barn is more building than you need.
At 10×16 - 160 square feet - this footprint is the one buyers pick when a smaller shed has already run out of room.
1 dealer carry this configuration near Temple, each with a physical lot you can walk before you buy.
About 10×16 tool sheds in Temple, GA.
The 10x16 tool shed currently in stock near Temple is priced at $4,422 cash. Rent-to-own is available from most dealers on this page, typically with no credit check.
At 160 square feet, a 10×16 building falls under the 200 sq ft mark that most jurisdictions use to exempt detached accessory structures from a building permit - but setback rules from property lines apply at any size, and HOA rules apply on top of both. Confirm with the Temple building department, or the county if your address is outside city limits, before you schedule delivery. Your dealer can usually tell you which applies.
Yes. Every building on this page is delivered fully assembled on a mule or trailer and set on your prepared site - most dealers here include free delivery within about 50 miles of their lot. You need a reasonably level pad and a clear path wide enough for the building to pass through. Gravel is the most common foundation; a concrete slab works but is rarely required at this size.
Compact storage for tools, mowers, and equipment where a full barn is more building than you need. The other styles stocked near Temple, GA are linked further down this page, so you can compare the same footprint across layouts before deciding.
Yes - this page is built from live dealer inventory, and sold buildings drop off it. As of your visit there is 1 10x16 tool shed available near Temple. Contact the dealer directly through the listing to hold one.
Every dealer on this page has a lot near Temple you can walk today.